产品banner

Road pollution removal vehicle

Road pollution removal vehicle

360 ° panorama (mouse sliding left and right)

startstop

Product brief introduction


YJW5180TWQ series of road pollution removal vehicles use Dongfeng Class II chassis, and are equipped with sub-frame, power assembly, sweeping unit, roll sweep, rear wide suction, box assembly, front water tank, high and low pressure water system, hydraulic system, A new type of washing and sweeping vehicle modified from an electronic control assembly. It has three functions: sweeping, sweeping, and deep cleaning. It is suitable for mechanized cleaning, sweeping, spraying and dust suppression of urban roads, highways, squares, airports, docks, tunnels, bridges, isolation walls, curbs and curb facades. Particularly suitable for harsh working conditions such as coal mines, sand and gravel plants, and steel mills.


Product technical features


1) The dedicated automatic clutch realizes no-load start of the auxiliary engine; the optimized power transmission system, the auxiliary engine working speed is in the economic fuel consumption area, far lower than the working speed of domestic products; the product has outstanding economy.


2) The high-pressure water pump drive system consists of an imported variable plunger pump, a control valve block, and a hydraulic plunger motor. The proportional valve ensures the high-efficiency and low power consumption of the high-pressure water pump, and is not subject to changes in the speed of the chassis auxiliary engine.


3) The high-pressure water pump drive system is equipped with a water cooler to ensure that the hydraulic system does not run at high temperatures, improve system reliability, and reduce failure rate.


4) The suction power of the self-developed dedicated fan is about 60% higher than that of similar international products, and it can implement dual-system work.


5) Special wear-resistant steel suction mouth, all-stainless steel dustbin and water tank; greatly improve the service life of the product; reduce user costs.


6) Adopting the layout of "center-mounted double suction four-sweep disc + roll sweep + tail wide suction", the suction sweep width and washing sweep width (including curb cleaning) reach ≥4.5m, far exceeding the traditional washing and sweeping vehicle.


7) Unique sweeping disc suction opening double-angled mechanism (both the suction tube and the rubber stopper in front of the suction opening can be turned over), which can suck larger garbage pieces.


8) The vehicle comes standard with 4 sets of wear-resistant steel wire disc sweeps, the sweeping discs are stepless speed regulation, and the full air control stepless adjustment of the sweeping wire ground pressure, according to the road cleaning conditions, while meeting the efficient and deep cleaning operation, obtain better results The life of wire sweeping.


9) The central position can be deflected to the left and right of the rolling sweep, the nylon mixed wire harness is used to sweep the wire, the bottom pressure is fully pneumatically controlled, and the double shock absorbers are also equipped to effectively solve the up and down movement of the transmission rolling sweep mechanism when working on the road. Condition.


10) All-weather operation, even on sunny or rainy days.


11) Innovatively develop a high-pressure jet rotating cleaning system to solve the problems of road fouling, hardening, and oil pollution, and realize deep cleaning operations.




The performance of this product is constantly improving, if you need to get the latest parameters, please call our company

label

0
Last:None
Next:None
Copyright © Yangzhou Jinwei Environmental Protection Technolog All rights reserved Record No: SU ICP No. 2021019778-1 technical support:YichengNetwork
  • home
  • telephone
  • Back